Turbos For Sale!!! ARCADE WELDING

Sell Your VW Parts Here

Re: Turbos For Sale!!! ARCADE WELDING

Postby DeleriousZ » September 12th, 2014, 2:21 pm

Yeah I'm looking to build a low boost high response fairly budget street VR-T. I almost want to go down to a gt28 but I'm not sure if I'll start breaking parts from boost coming on too hard at lower rpm.
User avatar
DeleriousZ
0-100
 
Posts: 156
Joined: June 2nd, 2012, 3:54 am
Location: Calgary

Re: Turbos For Sale!!! ARCADE WELDING

Postby RED_BULL » September 12th, 2014, 3:55 pm

DeleriousZ wrote:Yeah I'm looking to build a low boost high response fairly budget street VR-T. I almost want to go down to a gt28 but I'm not sure if I'll start breaking parts from boost coming on too hard at lower rpm.


Ya a GT28 is way too small you will just burn it up! Plus you will have no top end power.

Your better off not to have the boost come on too early cuz Vw trans cann't handle it. A gt 30 should come on petty good by 3500rpms.
User avatar
RED_BULL
0-60
 
Posts: 94
Joined: December 13th, 2011, 5:54 am
Location: Panarama nw Calgary

Re: Turbos For Sale!!! ARCADE WELDING

Postby RED_BULL » October 6th, 2014, 6:15 pm

Have a GT2871R with a double BATMO compressor up grade for the 1.8t engine with manifold for $2000
User avatar
RED_BULL
0-60
 
Posts: 94
Joined: December 13th, 2011, 5:54 am
Location: Panarama nw Calgary

Re: Turbos For Sale!!! ARCADE WELDING

Postby carlo79 » December 1st, 2014, 7:11 pm

im looking for a k14 for a 83 1.6L TD and any other bits like small intercooler, pipping, exhaust manifold, but will settle for just the turbo :-)
carlo79
 
Posts: 16
Joined: June 25th, 2013, 1:25 am

Re: Turbos For Sale!!! ARCADE WELDING

Postby RED_BULL » December 3rd, 2014, 6:35 am

carlo79 wrote:im looking for a k14 for a 83 1.6L TD and any other bits like small intercooler, pipping, exhaust manifold, but will settle for just the turbo :-)


HI sure K14 for $850. ya I can dig up a manifold and intercooler as well.
User avatar
RED_BULL
0-60
 
Posts: 94
Joined: December 13th, 2011, 5:54 am
Location: Panarama nw Calgary

Re: Turbos For Sale!!! ARCADE WELDING

Postby Ceedub » November 22nd, 2015, 9:52 pm

Hello....

I'm a new guy round here.... And new to the VW scene .... However I am looking for what you might have for options for an 02 golf tdi 5spd for turbos......
Mine just let go last night...

I'm looking for something over stock.... Ideally a 17/22 vnt but prices are very high from what I can find....

The car currently has 216 nozzles and egr shut off and a minor tune...
Have a 12mm pump head coming and a 3 bar map sensor, as well as a euro grind cam.... And a clutch is in the works as well... And have some options on trains upgrades...

However it's one step at a time.... And in today's economy .... We all must be very aware or every penny spent...

So please..... Any help is appreciated ....

Thx
Curt.
Ceedub
 
Posts: 1
Joined: November 22nd, 2015, 9:35 pm

Previous

Return to VW - Parts

Who is online

Users browsing this forum: No registered users and 1 guest

cron